Home › Tag Archives › current

Rife Bioresonanz Current Frequency Generator Rife Machine

Rife Bioresonanz Current Frequency Generator Rife Machine

Rife Bioresonanz Current Frequency Generator Rife Machine

Rife Bioresonanz Current Frequency Generator Rife Machine

Rife Bioresonanz Current Frequency Generator Rife Machine

Rife Bioresonanz Current Frequency Generator Rife Machine

Rife Bio resonance Current Frequency Generator Rife Machine. Comes with original manuals, additional frequency information. Also includes crystal vials, hand and foot straps and all associated cables. Works as it should. Rifle machine made in Germany. This item is in the category “Health & Beauty\Natural & Alternative Remedies\Electrotherapy”. The seller is “kool-jay” and is located in this country: US. This item can be shipped to United States.
  • Main Purpose: Pain Relief
  • Brand: Rife Machine Germany
  • Type: Electrotherapy
  • Color: Green
  • Model: Rife Bioreaonance
  • Country/Region of Manufacture: Germany

Colloidal Silver Generator Reverse Polarity Constant Current Stirring system

Colloidal Silver Generator Reverse Polarity Constant Current Stirring system

Colloidal Silver Generator Reverse Polarity Constant Current Stirring system

Colloidal Silver Generator Reverse Polarity Constant Current Stirring system

Colloidal Silver Generator Reverse Polarity Constant Current Stirring system

Colloidal Silver Generator Reverse Polarity Constant Current Stirring system

Colloidal Silver Generator Reverse Polarity Constant Current Stirring system

Ionic- Express Constant Current Colloidal Silver Generator. The fastest colloidal silver generator on the market. Technology derived from professional generators intended and developed primarily for the manufacture and mass production of colloidal silver. With the Ionic-express, we offer you some of the technology used in professional devices. Now take advantage of this technology with the Ionic-Express that we offer in a reduced device to make it available to individuals. No more waiting for hours to make efficient, high-quality colloidal silver. Produce your colloidal silver very quickly with the guarantee of obtaining a consistently efficient and crystalline production of uniform silver particles with a size range of 1 to 5 nm (nanometer). Main technical characteristics of the colloidal silver generator. Processor to control the power of the electrolysis, no adjustment to be made regardless of the volume to be produced or the size of the electrodes. Automatic polarity reversal system to prevent premature electrode wear and prevent clogging. Integrated agitation system allowing continuous stirring of the colloidal solution to prevent any particle agglomeration effect. Terminal block 4 electrodes. Increases the surface area of the electrodes to speed up the production process while maintaining a homogeneous and extremely fine particle size. Note intended to answer as many people as possible and to the many questions raised by this new device in our range. Some vendors claim that it is impossible to make excellent quality colloidal silver any faster. This is obviously totally wrong. The producers of colloidal silver are not equipped with simple rudimentary devices, they are obliged to equip themselves with sophisticated and technologically accomplished professional devices in order to achieve mass production. We also manufacture them. With very simple devices having just an output of 27 Volts (batteries, simple transformer) and at best sometimes with a brewing system you will have to wait hours indeed. This technique is more than 15 years old and not very expensive to manufacture works in troubleshooting but it is now obsolete. With the Ionic-express, we offer you some of the technology for use in professional devices. One of the technologies essential to avoid obtaining large particles is the automatic polarity reversal but also the control of electrolysis in order to avoid runaway. Coarse particles give a final result of a color ranging from yellow to dark brown depending on the concentration A very simple method to check if your colloidal solution is composed of very fine particles is the color and the turbidity of the water. If your colloidal silver solution has become cloudy and turns brownish yellow at 20ppm, for example, this is the result of an unchecked coarse solution. With the Ionic-express you no longer have to wait for hours and we guarantee a homogeneous production of colloidal silver composed of fine particles 1 et 5 nm (nanometer) up to approximately 35-40ppm. If you wish, you can operate the Ionic-express in slow production mode like any other rudimentary device without an automatic polarity reversal system or a built-in stirrer. You just have to install one electrode on the first pad of pair 1 and the second electrode on pad 1 of pair 2. Like all devices in the OligoCare® range, you will ultimately obtain a production of colloidal silver solution that is always colorless and crystalline, a sign of exceptional quality. Capable of producing 1 Liter of uniform colorless crystalline 10ppm colloidal silver particles in just 60 minutes. Equipped with a terminal block that can receive 4 electrodes, 2 possible operating modes. With 2 pairs of silver electrodes , you can produce for example. 8 oz of colloidal silver at 16 ppm in 15 minutes ou – 1 Liter of colloidal silver at 10 ppm in 60 minutes. With 1 pair of silver electrodes , you can produce for example : – 8 oz of colloidal silver at 10 ppm in 20 minutes ou. 1 Liter of colloidal silver at 10 ppm in 90 minutes. In the end, you will obtain a production of colloidal silver solution that is always colorless and crystalline, a sign of exceptional quality. Multi-colloïdal The 4 electrode terminal block also allows simultaneous production of silver and colloidal copper, for example a pair of silver electrodes on terminal No. 1 and a pair of copper electrodes on terminal No. Its size or format adapts to any type of container, from a simple glass of water to a 1 Liter beaker. To check the quality of the distilled water before starting your production. The Ionic- express generator + 1 110V / 220V mains adapter + 1 Pair of silver electrodes certified 99.99% pure of 12 gauge x 3.15 in. + 1 Food grade silicone tube. + Instructions for use. The item “Colloidal Silver Generator Reverse Polarity Constant Current Stirring system” is in sale since Friday, September 24, 2021. This item is in the category “Health & Beauty\Natural & Alternative Remedies\Other Natural Remedies”. The seller is “distrilab” and is located in Paris. This item can be shipped worldwide.
  • Formulation: Drops
  • Features: Current Limited, Auto Reverse, Stirring system
  • Active Ingredients: Silver
  • MPN: Ionic-express
  • Ingredients: Silver
  • Brand: Oligocare.com

COLLOIDAL SILVER generator with STIRRING and CURRENT LIMITING CIRCUIT (full kit)

COLLOIDAL SILVER generator with STIRRING and CURRENT LIMITING CIRCUIT (full kit)

COLLOIDAL SILVER generator with STIRRING and CURRENT LIMITING CIRCUIT (full kit)

COLLOIDAL SILVER generator with STIRRING and CURRENT LIMITING CIRCUIT (full kit)

COLLOIDAL SILVER generator with STIRRING and CURRENT LIMITING CIRCUIT (full kit)

COLLOIDAL SILVER generator with STIRRING and CURRENT LIMITING CIRCUIT (full kit)

COLLOIDAL SILVER generator with STIRRING and CURRENT LIMITING CIRCUIT (full kit)

COLLOIDAL SILVER generator with STIRRING and CURRENT LIMITING CIRCUIT (full kit)

COLLOIDAL SILVER generator with STIRRING and CURRENT LIMITING CIRCUIT (full kit)

COLLOIDAL SILVER generator with STIRRING and CURRENT LIMITING CIRCUIT (full kit)

COLLOIDAL SILVER generator with STIRRING and CURRENT LIMITING CIRCUIT (full kit)

COLLOIDAL SILVER generator with STIRRING and CURRENT LIMITING CIRCUIT (full kit)

COLLOIDAL SILVER generator with STIRRING and CURRENT LIMITING CIRCUIT (full kit)

Complete end to end solution. Our product is designed to produce. The smallest particles in size with range from 001 to. 01 microns (10 to 100 angstroms) or (1 to 10 nanometers). That is the size of silver particles that best absorb light in the indigo range, leaving only its inverse color, transparent to yellow, to be observed. What is in the box. Silver-eMed Colloidal Silver Generator. 2x10cm Ultra Pure Silver Electrodes 9999 (99.99%) 1.5mm diameter (14 Gauge). Flask Erlenmeyer borosilicate glass 250 ml (production vessel). High quality micro USB cable. Portable Digital TDS Meter 0-9990 PPM. Pharmaceutical grade amber glass 100ml. Pharmaceutical grade mist nozal spray 60ml. Graduated pipette dropper 3ml. Build-in step-up power module converting 5V (USB) to 27V (output voltage). Output current limited to 2mA. Automatic mechanic stirring 30 rpm (low noise). 2 position on/off power switch. Blue LED operation indicator. Why you should consider our solution and use it with confidence? Our product is designed to produce high quality colloidal/ionic silver water compromising nothing in the process. Our product is designed to produce the smallest particles in size with range from 001 to. 01 microns (10 to 100 angstroms) or (1 to 10 nano-meters). It has a build-in step-up power module converting 5V to 27 volts and current limiting circuit output to 2mA. Due to the current limiting circuit the silver electrodes lifespan is significantly increased as well as the device extended operation on external battery supply. Using the included digital TDS meter you are able to precisely measure and reach the concentrations you are targeting. Particle size matters (smaller is better). Why we use limited current? Any classical colloidal silver generator will produce ionic silver at the same time it is producing colloids but the key difference to produce smaller particles (ions) is limited output current to be applied. The emitted particle size depends on the intensity of the electrical current while the concentration (strength) depends on the time the current is flowing between the silver electrodes. Higher currents tend to blast off larger particles from the silver therefore we have limited the current to 2mA. Low (limited) current tends to generate smaller particles, and therefore silver ions rich solutions. Bob Becker’s recommendations and our own extensive research in producing high quality colloidal silver water the optimal direct current output appears to be within the range of 25-30 volts. Why stirring the solution is important? In parallel during the process the silver concentration within the distilled water will not be equally redistributed through the volume. It will be significantly higher closer to the electrodes. To limit the concentration of the colloid at any point you need to stir the solution during the process. When preparing your solution give it a time to reach the concentration you are targeting. The batch cycles depends on the colloidal silver strength (ppm) you desire to achieve. Electrodes will darken in color at the end of each cycle. In order to produce high quality and pure colloidal/ionic silver water we strongly recommend you carefully clean the electrodes before each cycle (in 30 minutes to one hour intervals). As you can see from above table the more cycles you perform the stronger the solution will get. However the solution will achieve its saturation somewhere between 20-30ppm. This basically means if you continue the process you may compromise the quality. Take more of the solution with 10-15ppm rather than targeting to achieve higher ppm. Please, refer to the user manual for detailed step by step process walk-trough. The item “COLLOIDAL SILVER generator with STIRRING and CURRENT LIMITING CIRCUIT (full kit)” is in sale since Tuesday, April 30, 2019. This item is in the category “Health & Beauty\Natural & Alternative Remedies\Other Natural Remedies”. The seller is “e-med.instruments” and is located in London. This item can be shipped worldwide.
  • Silver Electrodes: 2x10cm Ultra Pure 9999 (99.99) 1.5mm diameter
  • Brand: Silver-eMed
  • Production Vessel: Flask Erlenmeyer borosilicate glass 250ml
  • Stirring Function: Automatic Mechanic Stirring (30 rpm)
  • TDS Meter: Portable Digital TDS Meter 0-9990 PPM
  • Limited Current: Limited Electrodes Current to 2mA
  • Used Voltage: Build in power inverter 5 to 27v
  • Country/Region of Manufacture: United Kingdom
  • Powered by: micro USB cable (5v)
  • Colloidal Silver Particles Size: Silver particles size from 001 to .01 microns

COLLOIDAL SILVER generator USB powered with STIRRING & CURRENT LIMITING full kit

COLLOIDAL SILVER generator USB powered with STIRRING & CURRENT LIMITING full kit

COLLOIDAL SILVER generator USB powered with STIRRING & CURRENT LIMITING full kit

COLLOIDAL SILVER generator USB powered with STIRRING & CURRENT LIMITING full kit

COLLOIDAL SILVER generator USB powered with STIRRING & CURRENT LIMITING full kit

COLLOIDAL SILVER generator USB powered with STIRRING & CURRENT LIMITING full kit

COLLOIDAL SILVER generator USB powered with STIRRING & CURRENT LIMITING full kit

COLLOIDAL SILVER generator USB powered with STIRRING & CURRENT LIMITING full kit

COLLOIDAL SILVER generator USB powered with STIRRING & CURRENT LIMITING full kit

COLLOIDAL SILVER generator USB powered with STIRRING & CURRENT LIMITING full kit

COLLOIDAL SILVER generator USB powered with STIRRING & CURRENT LIMITING full kit

COLLOIDAL SILVER generator USB powered with STIRRING & CURRENT LIMITING full kit

COLLOIDAL SILVER generator USB powered with STIRRING & CURRENT LIMITING full kit

Is complete end to end solution so you can make your own safe, micro-particle, therapeutic colloidal silver water (full kit). Our product is designed to produce the smallest particles in size with range from 001 to. 01 microns (10 to 100 angstroms) or (1 to 10 nanometers). That is the size of silver particles that best absorb light in the indigo range, leaving only its inverse color, transparent to yellow, to be observed. What is in the box. Silver-eMed Colloidal Silver Generator. 2x10cm Ultra Pure Silver Electrodes 9999 (99.99%) 1.5mm diameter (14 Gauge). Flask Erlenmeyer borosilicate glass 250 ml (production vessel). High quality micro USB cable. Portable Digital TDS Meter 0-9990 PPM. Pharmaceutical grade amber glass 100ml. Pharmaceutical grade mist nozal spray 60ml. Graduated pipette dropper 3ml. Build-in step-up power module converting 5V (USB) to 27V (output voltage). Output current limited to. Automatic mechanic stirring 30 rpm (low noise). 2 position on/off power switch. Blue LED operation indicator. Why you should consider our solution and use it with confidence? Our product is designed to produce high quality colloidal/ionic silver water compromising nothing in the process. 01 microns (10 to 100 angstroms) or (1 to 10 nano-meters). It has a build-in step-up power module converting 5V to 27 volts and current limiting circuit output to 1mA. Due to the current limiting circuit the silver electrodes lifespan is significantly increased as well as the device extended operation on external battery supply. Using the included digital TDS meter you are able to precisely measure and reach the concentrations you are targeting. Particle size matters (smaller is better). Why we use limited current? Any classical colloidal silver generator will produce ionic silver at the same time it is producing colloids but the key difference to produce smaller particles (ions) is limited output current to be applied. The emitted particle size depends on the intensity of the electrical current while the concentration (strength) depends on the time the current is flowing between the silver electrodes. Higher currents tend to blast off larger particles from the silver therefore we have limited the current to 1mA. Low (limited) current tends to generate smaller particles, and. Therefore silver ions rich solutions. Bob Becker’s recommendations and our own extensive research in producing high quality colloidal silver water the optimal direct current output appears to be within the range of 25-30 volts. Why stirring the solution is important? In parallel during the process the silver concentration within the distilled water will not be equally redistributed through the volume. It will be significantly higher closer to the electrodes. To limit the concentration of the colloid at any point you need to stir the solution during the process. When preparing your solution give it a time to reach the concentration you are targeting. The batch cycles depends on the colloidal silver strength (ppm) you desire to achieve. Electrodes will darken in color at the end of each cycle. In order to produce high quality and pure colloidal/ionic silver water we strongly recommend you carefully clean the electrodes before each cycle (in one hour intervals). As you can see from above table the more cycles you perform the stronger the solution will get. Please, refer to the user manual for detailed step by step process walk-trough. The item “COLLOIDAL SILVER generator USB powered with STIRRING & CURRENT LIMITING full kit” is in sale since Sunday, September 30, 2018. This item is in the category “Health & Beauty\Natural & Alternative Remedies\Other Natural Remedies”. The seller is “e-med.instruments” and is located in London. This item can be shipped to all countries in Europe, United States, Canada, Australia.
  • Brand: Silver-eMed
  • Production Vessel: Flask Erlenmeyer Borosilicate Glass 250ml
  • Non-Domestic Product: No
  • USB powered: Powered via micro USB socket
  • Modified Item: No
  • Country/Region of Manufacture: United Kingdom
  • Silver Electrodes: 2x10cm Ultra Pure 9999 (99.99) 1.5mm diameter
  • Stirring Function: Automatic Mechanic Stirring (30 rpm)
  • Custom Bundle: No
  • TDS Meter: Portable Digital TDS Meter 0-9990 PPM
  • Limited Current: Limited Current to 1mA
  • Metal: Silver
  • Colloidal Silver Particles Size: Particles Size 001 to .01 microns